Login FibrSol ONT ONU Modem Router

How to Login FibrSol ONT ONU Modem?

FibrSol ONT Router used in different fiber GPON and EPON OLT as client end last-mile connectivity to deliver internet over fiber cable with triple-play services such as data voice and TV as well. Login Fibersol ONU modem and other brands such as richer link ONU device steps are the same. You need to login Fiibrsol FTTH ONT modem either you are a subscriber or an internet, service provider. If you are a subscriber you required to log in Fiber ONT router to manage wireless settings and update the default SSID and password, but If you are ISP then you required to log in ONT modem to configure internet, voice service, and wireless settings as well to activate internet connections. In this manual, you will get simple steps to login and setup the Fibrsol ONT ONU router modem to manage your settings from the browser and keep secure your fiber internet connections. Login fibersol fiber optic ONT modem required a default login IP address, username, and password that usually available on the device sticker when you buy a new ONT. Although you can find Fibrsol’s default login IP address and username password details below.

Login NetLink FTTH OLT [GPON/EPON]

Default login Settings for FibrSol

Default login credentials always printed to your fiber ONT box and device itself when you buy new modem. Default login username and password might different for Non-Wireless Fibersol ONT and WiFi ONT with dual-band or single band.

List of Default Login IP Address, Username and password

Fibrsol Default Login IP address– 192.168.1.1

Default username – admin or User

Default password– onu@123456 or user

Check default login settings available in your FTTH ONT router.

How to Factory Reset Optilink ONU/ONT Modem ?

Steps to Login Fibrsol FTTH ONT

You need to connect either wired or wireless connection fiber ont device depend on the ONT type. If ONT device without WLAN and 1Ethernet port only then use LAN connection for Wireless ONT use either wired or wireless.s

Turn on the ONT device with dc adapter as comes with the device.
Connect fiber ONT Ethernet port to PC/Laptop for Wired connection.
Use WiFi to connect from laptop to access without wire.
Go to computer/laptop LAN settings and make sure it is DHCP mode to get an IP address from ONT DHCP server.
Open a web browser and access http://192.168.1.1 and wait to load ONT login page with username and password input box.
Use username/password admin/onu@123456 or user/user in default mode as a supported model.

192.168.1.1 Admin username and password

Once you are login to the ONT web interface you can find all settings menu configure Internet settings, wireless settings, and other services.

If you are ISP you have to configure WAN settings as per VLAN ID and profile created to OLT and configure same to ONT device either PPPoE, Static internet type.

IF you are a subscriber goes to wireless settings to change your wireless SSID and password.

Login SyroTech GPON EPON OLT -192.168.8.100

Change Wireless SSID and Password

Fibrsol ONT router preconfigured with default wireless SSID and password name as per Fibersol default ssid so you have to change the default SSID and password to keep your WiFI secured.

Go to Network – WLAN 2.4G (if dual-band also get WLAN 5.8G option so can configure one by one)

WLAN Settings

Wireless Enable – Tik (keep to enable)

Wireless Channel- Auto

Tx Power- 100%

SSID- FSWIFI-E310 (change Fibersol SSID to new SSID as per your choice)

Channel Bandwidth- 20/40

Security mode- WPA-PSK/WPA2-PSK

WPA Pre-Shared Key- Create a new WIFI password using alphanumeric and special character combinations.

Press Apply button to save settings. You may be disconnected from WiFi if using a Wireless connection to access ONT settings. Connect again with a new WiFi name and password.

Also do not forget to change the default password for your fiber ONT modem to secure access of settings by the users.