HSGQ FTTH ONU / ONT Login
HSGQ Fiber EPON, GPON OLT, and ONU products used in a fiber network to provide end-user connectivity and distribute broadband connection for multiple users. If you are using HSGQ brands fiber EPON GPON OLT or ONT device or you may a subscriber whos internet connection connect with HSGQ ONT unit installed at your home looking to login HSGQ ONU and change settings?
Although you can also find the HSGQ FTTH OLT manual and use guide for detailed configuration for setup fiber network for the first time. This user guide will provide you step by step simple login manual for the HSGQ FTTH ONU device using default login settings. If your HSGQ ONU supports wifi then you can connect ONT wither using wifi connection or wired but if it only supports Ethernet then you have to connect using a LAN port from PC/Laptop. Your OLT must be configured before configuration to ONT device so if you are ISP then make sure you have a working EPON/GPON OLT device with an active internet connection. To login HSGQ ONT you need default settings that also printed to the device sticker and also find given below.
HSGQ Default Login settings
Default Login username, password, and IP address also printed to ONU sticker and quick user manual included with a new box. However, you can find login detail below.
HSGQ FTTH Default Login IP address– 192.168.1.1
Default username – telecomadmin
Default login password– admintelecom
If your login password not works you can use some more username password combinations as given below.
Right down login credential as printed for your ONT modem model to get started login process from wired or wireless connections.
Steps to Login Fiber ONU web interface
After getting ready with login settings now follow steps to login and setup HSGQ fiber ont for bridge or router mode.
- Connect ONT Router modem using a wired connection from Ethernet or wireless if ONT supports WLAN.
- Fiber cable coming from OLT device will connect to PON port.
- Power ON ONT device with DC adapter comes with box.
- Go to PC TCP/IPv4 LAN settings and change to DHCP mode or use 192.168.1.10 to access ONT web interface.
Access ONT Web interface
Open the web browser and access http://192.168.1.1 and wait to get the username and password pop-up window.
Provide username and password to authenticate and enter to ont settings page.
After the settings page, you have to configure WAN settings as per your OLT configuration.
ONT WAN Network Settings
You must know the WAN settings detail to configure your ONU until as per internet settings.
If your internet work in PPPoE or static mode you should get WAN settings from ISP.
Go to WAN- PON/WAN settings
Select connection type- Internet or Internet TR-69 if using TR-69
Channel mode– PPPOE/ STATIC
Select as per your internet type and provide settings accordingly.
Save settings and check the internet should start work if everything works fine.
The next important step for the first-time setup is to update the default login password for HSGQ ont the device.
Change Wireless SSID and Password
If you are using ONT with wireless then you must update the default SSID name and password to secure your home wifi internet.
Go to Wireless settings.
WiFI SSID – Change default SSID as per your choice of new wifi name.
WiFI key– WPA2-PSK
Password- create a new wifi security key.
Save settings and connect again with the new wifi name and password from your mobile, laptop, and other wifi devices.
Change Login Password
Default login password easily available from the internet and also printed to device label so it is highly recommended to change the default login password.
Go to Admin- Password
Username – telecomadmin (choose the user you want to update password)
OLD password– admintelecom (default password, of already changing use same as old password)
New password– create a new login password.
Confirm password- Confirm the new password again.
Press Apply changes to confirm settings. Log out web interface and log in with a new password to confirm.
This is a simple login method to access the ONT unit from the web interface.
- jiofi.local.html | Admin Login JioFi Router
- Free Download SyroTech FTTH OLT EMS Software
- Login NetLink FTTH OLT [GPON/EPON]
- login VSOL Fiber OLT – 192.168.8.100/192.168.8.200