How to Login PLDT Home Fibr Router?
PLDT stands for Philippine Long Distance Telephone Company that provides broadband internet connection for end-users. If you are a PLDT internet subscriber and PLDT fiber ONT modem installed at your home and looking user guide to access the web interface then this article will help you to the login web interface. PLDT fiber internet router is pre-installed with default settings so it is strongly recommended to change the default wireless name and security password.
If your PDLT wireless fiber router, you can use wired or wireless to connect the router using both ways to access the web interface. To change WiFi name and password it is not important that your Pldt fibr plans article or not to login router settings. You need a default login IP address, username, and password to access router settings that are usually printed on a modem sticker or a quick user guide that comes with the router.
Default Login settings PLDT Fibr Modem
PLDT router-modem secured with three different users with admin rights for security reasons. All users get limited user rights or administrator rights to control settings.
PLDT Login IP address- 192.168.1.1
Default Username and password list that works with Pldt fiber.
Regular user- admin
Username – adminpldt
Note: super admin and adminpldt username and password specific for each router so if the above username and password not work please find super admin username and password for your pldt router.
After getting pldt login credential next step is a physical wired or wireless connection with PC/Laptop or mobile device to access Fibr ONT settings.
Physical or Wireless connection with PLDT modem
If your pldt router support only a wired connection then use a LAN cable to connect your PC/computer or if your PLDT fibr router support WLAN also you can use the default WIFI name and password to connect wirelessly.
- Power ON PDLT modem or Router to DC adapter included with box if setup first time.
- Fiber cabel your internet provided may already connect to PON port or if WAN port using CAT 6 cable.
- Connect LAN cable from Pldt LAN port to PC/computer or use WiFi SSID and password to connect using wireless.
- IF using a Computer/laptop make sure TCP/IPv4 LAN settings should be in DHCP mode to auto IP address configuration from a modem DHCP server.
After connection with modem now proceed to access the modem web interface to browser.
Access Router settings to a Web browser
Open a web browser and access PLDT defaults IP address http://192.168.1.1/fh and wait to load login page asking for username and password as shown below image.
Welcome Please enter your username and password to log in.
Provide username and password as printed to your router to login to the regular user or super admin or admin pldt.
After successful login to the PLDT fiber home router, you will get a control panel where you can find all settings. It depends on which user you use to log in. For a regular user, you may get limited settings.
If you are an internet service provider and setup a modem for the internet then you must have internet settings.
If you are a subscriber then you must change the default wireless name and password to ensure the protection of your wifi internet. Method of login PLdt DSL router and wifi home fiber router same so if you have any PLDt modem you can
Change Wireless SSID and Password
Default Wireless name and key also printed to router settings so it’s very important to update the default name and password.
Go to the Network tab from the top menu to access wireless and LAN and broadband settings.
Network- 5G Basic (for dual-band router you have to configure 2.4G and 5GHz name and password)
SSID- Create Wireless SSID for your Home fibr as per your choice.
WiFi Password- WPA-2PSK
WiFI Key– create a stronger password PLDT Home Fibr router to secure wireless internet.
Apply and save settings and connect again if you are using wireless to access router settings.
After wireless settings must change the default login password for your pldt router.
Change PLDT Login Password
PLDT home fiber modem pre-configured with the default login username and password so your modem must change login password during first-time setup.
Go to Management- User Account
New Password– Create pldt new login password
New Password Confirm– Type the login password again to confirm.
Apply And save settings.
If you are facing any login issue or PLDT modem IP address not working or may taking too long time to respond can come due to any missed network configuration or configuration change.
You can make the PLDT home fiber router factory reset using the reset button. Press the reset button for 10-15 seconds and wait to restore the configuration to default mode.
If facing slow internet speed you can refer to the PLDT fiber website to buy high-speed pldt fiber plans to boost internet download and upload speed.
- Secureye Fiber ONT Modem Login and Setup Manual
- 192.168.0.10 Admin Login Router
- 192.168.1.10 Login Username and password
- Login HSGQ ONU/ONT Web Interface
- Login Tenda TE-G103 Fiber ONT/ONU