192.168.55.1 Router Admin Login Password

192.168.55.1 Admin Password Login Router

192.168.55.1 a rarely used Default Login IP address by the router and modem brands. Sweex LW055 54Mbps WIFI router used 192.168.55.1 as default login IP address in legacy wireless router models. Probably required to login to your router, modem, or network device with default login to make any configuration and update settings. If you have Sweex WiFi router or any modem or router with a default gateway IP address is 192.168.55 .1 and looking to login router web interface or settings then bookmark this article. You can use this login user manual to access router settings using the 192.168.55.1 IP address if it’s a factory settings login IP for your device.

To open router settings using 192.168.55.1 default IP address you also required a default username and password to authenticate. You can use a wireless or wired connection with a modem and router to login settings depends on the connection supported type by your device. default login username and password printed to router sticker and quick user manual included with the new device. however, you can also find some of the most working username and password combinations below if you are not sure about login details for your device.

192.168.1.3 Admin Login Router

Default login Credential to Login Router

Turn your router and find a router label to get the login IP address, username, and password for first-time access cable modem, DSL modem, or Wireless router. Find a great combination list of login username password mostly worked in all routers.

Default Login IP address – 192.168.55.1

Username Password
sweex mysweex
admin admin
admin 1234
admin password
admin na
root admin123

List of Default Login IP Address, Username and password

For Sweex router use username, ‘sweex” and password “mysweex” for different brands try username and password combination one by one.

Steps to Access Router with 192.168.55.1

You need to connect the router using a WIFI network or Wired cable from the Ethernet port to login settings. if your router or modem does not support WLAN then you can use only a wired LAN cable.

Connect Router using WIFI SSID for wireless connection.
Use LAN cable to connect using a wired connection from Router LAN port to Computer LAN ports.
Power ON router with DC adapter included with the router.
Go to computer LAN settings and make sure the “obtain an IP address automatically” option selected.

jiofi.local.html | Admin Login JioFi Router

Access Router Web interface to Browser

After connection and got login information now open the web browser and access http://192.168.55.1 to the URL bar and press enter key. if 192.168.55.1 not working tye http://192.168.1.1

After a few seconds, you will get a router login page asking for authenticating to access the control panel.

Use username “sweex” and password “mysweex” for Sweex LW055 Wireless router or use login username password as printed to your router sticker.

Press the OK button to log in to the router and once logged into the router settings now you can setup the router WAN internet settings for first-time setup, Wireless settings, and other security features such as Mac access list, Port forwarding, content filtering, Bandwidth management, and more.

Steps to Step change BSNL Broadband WiFi Password

Change Wireless SSID and Password

Setup and update wireless name and password important for first-time configuration as well as regular updating Wi-Fi security key protect your internet from unauthorized access.

Go to Wireless Settings in router settings.

Wireless – Basic

SSID- Sweex LW055 (change this SSID as per your choice new WIFI name you wish to use for your wifi network)

Broadcast SSID– Enabled

Press Apply button to save wireless settings. If you are using a Wi-FI name to access router settings then you will be disconnected from the router as SSID name change. Connect again with a new name and go to the Security tab to change the WIFI password.

Go to Wireless- Security

Security Configurations

Authentication Type- WPA2-PSK/WPA-PSK

WPA Mode- Hex

WPA2-Passphrase (WiFI Key)– new WIFI password (create new wifi password with a combination of special character, alfa numeric)

Press Apply button to save settings and connect your mobile, Laptop, and other wifi devices with a new wifi name and password.

Login NetLink FTTH OLT [GPON/EPON]

Change Login Password

Also, update the default login password to protect router settings access from users who are connected to your internet.

For Sweex broadband router Go to MISCS – Login ID and Password Setup option from the left side menu.

For different routers go to the system or Administrator settings option.

Username – Sweex (cannot change for sweex router)

Current password– Sweex (use your current password used for login)

New Password– Create a new login password

Confirm password– Confirm the new password again.

Login Huawei FTTH ONT/ONU

Press Apply button to confirm settings and log in with a new password for further configurations.

If you are unable to access the router using the default login IP 192.168.55.1 not working for your router but or getting a wrong username and password error while trying to access the router settings then you should factory reset the router to restore into default mode.

Press a small reset switch for 10-15 seconds to restore into default mode and setup again from start.