Login Digisol ONT / ONT Modem Router

Login Digisol FTTH ONU/ONT Router

Login user manual for Digisol DG-GR1321 wifi ONT and DIGISOL-GR4010 wireless and Non-wifi fiber ONT/ONU device for setup WAN, LAN, and wireless settings. Although fiber one device can fetch configuration from OLT device without login to the ONT user manual from the client end, if you are a subscriber then you need to login ONT device to change the default WIFI name and password to secure your wifi internet. You are required to connect your fiber ont device either using wired or WIFI connection to access ont web interface to login settings. The login method for any Digisol FTTH ONT model is almost the same so you can use this user manual to log in to Digisol Fiber ONU unit with simple steps.

login VSOL Fiber OLT & 192.168.8.100/192.168.8.200

Default Login Credential for Digisol FTTH ONT

Default login settings are printed to the ONT backside sticker and the Quick user guide comes with the unit box. However, you can find Digisol ONT default settings below.

Default WIFI SSID– DIGISOL

Digisol Default WIFI Password- 12345678

Default Login IP Address– 192.168.1.1

Digisol Web interface login username- admin

Default Web GUI Password- admin

List of Default Login IP Address, Username and password

Steps to Login Digisol ONT

The first step to set up the ONT device is a physical connection with the fiber cable and PC/Laptop you wish to connect. If your ONT device is without WIFI then you required a WIFI router to connect ONT device Ethernet to the WIFI router WAN port to turn wired internet to WIFI.

Connect Fiber cable to ONT PON port. (if your ISP already connect fiber and other connection then keep it as it is)
For DG-GR1310 and DG-GR1321 you can use Wired or WiFi to connect from the computer/Laptop. For non-wifi ONT devices use a LAN cable to connect from the ONT LAN port to the computer LAN port.
Go to PC/Laptop LAN TCP/IPv4 settings and use static IP address – 192.168.l.10, 255.255.255.0.
Follow further steps to access ont web interface.

Login to ONT Web interface

Open web browses and access http://192.168.1.1 to the URL bar and wait until ont login page is loading.

Provide “admin” for a first-time login username and password.

Press the login button to access ont modem settings.

After login go to Network- WAN configuration to setup internet settings as per internet type, Routing mode, or bridge mode depending on OLT configurations. The next important step is to change Digisol’s default WIFI SSID and password.

Login and Setup Optilink ONT/ONU

Change WiFI SSID and Password

Digisol Fiber onu preconfigured with a default WIFI name and password that is easily available with a user manual so it is recommended to change all default settings before using the internet.

Go to Network- Wireless Basic

Band – 2.4G (BGN) for Dual-band ONT you will get 2.4GHz and 5Ghz wifi settings.

Mode- AP

SSID- DIGISOl (change this SSID to a new wifi name as per your choice you want to use for your wifi)

Channel- Auto

Press Apply settings and go to Wireless security Settings.

Change WLAN Security Key

Go to Network- WLAN Security

SSID Type- Select the SSID name you created

Encryption Mode- Personal (pre-shared key)

Pre-shared format- Passphrase.PRes-shared key– create Ont wifi new password.

Press Apply Changed button to save settings and re-connect all WIFI users with new name and passwords.

After WIFI settings you must update the ONT login password to protect settings access from users connected to wired or wireless networks.

Login SyroTech GPON EPON OLT -192.168.8.100

Change DigiSol ONt Login Password

Create a strong login password that hard to guess and easy to remember.

Go to Management- User management

Username– admin

Old Password– admin

New Password– create a new password.

Confirm new password– type new password again to confirm.

Save settings and login ont with the new password.

Factory Reset Digisol Fiber ONU

If you forget the login username or password or you may face any login issue while accessing ont login IP address to the browser? Make ONT to factory reset if internet disconnection issue, forget login password or any other issue to fresh configuration for ONT again.

Steps to Hard reset Digisol Fiber ONU

Locate a small reset button beside PON or LAN ports.
Press and hold the reset button for 10-15 seconds using any shard point needle.
ONT PON, Power, LAN, and other LED will turn off and turn on again and will take a while for rebooting.
Ping ONT default IP address to confirm settings restored to default mode.
Follow the above steps again to access ont settings.