How to Login Fiberhome ONT and ONU with Default Settings

Fiberhome FTTH ONT Modem Login and Setup

Fiberhome provide FTTH solution and network products for fiber networks. Login to Fiberhome AN5506 FTTH ONT or ONU device from the web interface to setup the first time as well as change the default WIFI name and password to secure your internet from others.

The login manual for FiberHome AN5506 GPON ONT, as well as dual-band HG6821M Fiberhome GPON ONU, are the same so can use this login manual for any Fiberhome FTTH ONU login.

Default Login IP address and username password printed to Fiberhome Modem sticker as well as a quick user guide included with the device. Fiberhome default login IP address might differ for each router and FTTH modem that depends on the manufacturer. Fiberhome FTTH ONT default login IP address 192.168.1.1 or 192.168.1.254 for different model numbers.

Although Fiber ONT and ONU are directly managed by Fiber OLT devices remotely if you wish to change the default wireless SSID and password then you need to access the web interface from a mobile or Laptop using a wired or wireless connection. You can also add an extra security layer to your internet such as MAC access list, parental control, port forwarding, and others that you can configure after login Fiberhome ONT settings. Follow the step-by-step guide to log in Fiberhome FTTH ONT modem WiFi router.

login VSOL Fiber OLT 192.168.8.100/192.168.8.200

Default Login Settings for FiberHome ONT Modem Router

Find the Default credential for Fiberhome ONT printed to the router sticker along with username and password and ONT model number to find more detail from the official website.

Fiberhome Default Login IP- 192.168.1.1 or 192.168.1.254

Default username- admin

Default password– admin

List of Default Login IP Address, Username and password

How to Login Fiberhome ONT Modem Web interface?

Login Fiber home Fibre ONT and ONU devices need to connect either wifi or wired from the modem LAN port. Use the LAN cable to connect from the Lan port to the Desktop or Laptop LAN port and for wireless find the default SSID and password printed on the modem sticker.

Unbox Fiberhome ONT Modem and connect it to the DC power adapter that comes with the device.
Plug fiber patch cord to PON port if first-time configurations.
Connect LAN cable from ONT LAN port to computer/laptop Lan port.
Use default SSID and password printed to sticker for Wireless connection.
Open the web browser and access http://192.168.1.1 or http://192.168.1.254 and use the default login username and password as printed to the Fiberhome ONT modem.
After login, you will be redirected to the dashboard where you can find all settings such as internet, Wireless, LAN, Accounts, and others.
To configure WAN settings you can get internet settings from your internet provider if you are a user and if you are an internet service provider just configure ONT using OLT or manually as per internet wan settings.

How to Reset PLDT Router and Modem?

Change Wireless Password and SSID in Fiberhome

Default SSID and WiFI key printed to sticker and easily available on internet different forums and technical blogs so it is always recommended to change default settings.

Go to the Network tab and under Network Advanced ab for Wireless settings change.

Network-Advanced

SSID Choice– 1 (choose if you using virtual SSID also for guest network)

SSID Name– FIBER (change default SSID and create a new name for your wifi network.)

Security Policy– WPA2-PSK

WPA Algorithms= AES

Passphrase– 123456789 is default change the default wifi password and create a new password.

Press Apply button to confirm settings and you may be disconnected from the router after updating the default SSID and password with the new wifi name and password. Connect again to configure further settings.

Best DD-Wrt Router Under $50 in 2023

How to change Admin Password?

Default username and password printed to modem sticker and can change from account management option as shown below image. Follow steps to update the default Fiberhome admin password to secure your router.

Go to Management – User Account

Username– Type the username you wish to change the password for.

New password– Create a new login password.

New password Confirm– Confirm the new password to avoid mistakes.

Press Apply Button to confirm changes and log in modem with the new password again.

Keep remembering the new login password and do not write over the modem sticker to secure unauthorized access.

Final Words

ONU and ONT Fiberhome are the same so if you have printed ONT or ONU in the modem sticker you can follow the above steps to set up your Fiberhome ONU. The login method for Fiberhome GPON ONT and EPON ONT is the same only GPON support a Gigabit interface and EPON support Fast ethernet. If you are not sure about the model number of your Fiber home ONT device or the username and password not working then you can get the same from the official website as well as contact your service providers to ask if they already configured your ONT and default login password changed.