192.168.1.3

192.168.1.3 Admin Login Router

192.168.1.3 Login Router Default Password

192.168.1.3 is an IP address from the network 192.168.1.0 network id. Every router, modem, or any managed network device preconfigured with a default LAN IP address for first-time configurations. Most of the router and modems use 192.168.1.1, 192.168.2.1, or 192.168.0.1 default gateway IP addresses by leading brands. Login method for routers using 192.168.1.3 as default login IP address and 192.168.1.1 is similar. If you have any brands DSL modem, Wireless router, or other network devices with a 192.168.1.3 login IP address you can follow this user guide. modem or router default login IP address 192.168.l.3 also printed to router sticker available on the router as well as quick user manual included with new routers.

However, most modem and router brands use a common default IP address and admin username password. In some rare routers, Repeaters, or network devices configured with a unique login IP address that you can find in the router sticker. To access a WiFI router, ADSL modem or any other cable modem need a physical or wireless connection with the device. you can find login IP, username, and password printed to router sticker along with router model, mac address, and serial number details.

How to Block website and Apps in Fiber ONT/ONU

Default Login Details for 192.168.1.3

Every router protects with a login username and password in default mode so while access router settings you must know the login credential for your router. Although login detail for leading brands same and also available on router box and label. If login username and password not working for your router or modem then try below login credential combinations.

192.168.1.10 Login Username and password

Default Login IP address 192.168.1 .3

Username Password
Admin Admin
Admin Password
Admin 1234
Root Root
Admin NA

Find login IP address and username password detail in your router and follow further steps to access web interface using 192.168 .1.3.

192.168.1.1 Admin username and password

Access Router Web Interface

You need to connect the router using wired if non-wireless modem or router and wired or wireless if support both options.

Connect a LAN cable from router LAN port or use WiFi SSID to connect using wireless if WLAN compatible modem or router.
Go to PC LAN IP settings and make sure it’s in DHCP mode to get IP from the router DHCP server.
Power ON router with DC adapter included with the router.
Internet cable coming from ISP should be connected to the WAN port so keep it as it is.
Open a web browser and access http://192.168.1.3 and wait for a few movements until the login page loading.
Provide username and password for first-time default settings and if already changed use the same password.
After login to the router, you will control a panel where you can find wireless settings, LAN settings, WN settings, Port forwarding, and other security feature that you can configure to protect your internet.

Login Huawei FTTH ONT/ONU

Change Wireless SSID and Password

If your modem or router supports Wireless then you should update the WiFI network and password during the first-time login.

Go to Wireless- Basic wireless

WiFI SSID – Change the WiFI SSID network name as per your choice.

WiFi Security– WPA2-PSK

Key- Create a wifi security key here.

Save settings and connect again with the new WiFi name and security key.

How to Factory Default BSNL MODEM & 2Way

192.168.1.3 Troubleshooting

If you are unable to access the router using 192168.1 3 and getting the site can’t reach error or taking a too long time to respond. Before accessing the IP address to the browser first open the command and ping 192.168.1.3 to make sure the router is accessible.

Router Reset Guide to Restore Default settings

IP address 192.168.1.3 not working

Follow the below steps to fix the login error while accessing the router with the default IP address.

Make sure the default IP address you are using to access the router also printed to the router sticker.
If your router already configured then check if the default gateway IP address not changed with different IP or new IP series.
Check if PC/Laptop IP settings using DHCP mode or in the same series IP address. EXP- 192.168.1.2 or any other from the same series.
While typing the router IP address make sure you are using the correct format. http //192.168.l.3 , 192.168.1.3.1, www.192.168.1.3, 192.168.1.3.8080 all are wrong IP address.
If you got the router login page getting the wrong IP address and password then you have to reset the router using reset button.

Reset Router from Reset Switch

Making router reset will erase all configuration and need to set up again to run the internet. If you don’t have a configuration backup file or internet settings detail then don’t reset.

Locate a small reset button beside Ethernet or bottom side.
Press the reset button for 5-10 seconds and release it while the led light automatically blinks and rebooting.
The router will automatically reboot and take a few seconds and restore settings into default mode.
Once router reset done ping 192.168.1.3 and after getting a reply from IP address follow the above steps again.