192.168.123.1 Admin Login Router
Login 192.168.123.1 default login IP address to access wireless router in default factory mode. There are many brands that are using 192.168.123.1 or 192.168.123.254 as the default gateway IP address 192.168.123.1 Pentair, SMC, Trendnet, D-Link, and many others. You need to access the router web interface using the 192.168 123.1 IP address for first-time configuration and set up an internet cable as per broadband internet connections.
192.168.123.l is the default IP address from network 192.168.123.0 and broadcast network Id 192.168.123.255 also calls a private IP address used for the local network. If you have Trendnet Wi-Fi ADSL Gateway TEW-659BRV or any other Trendnet DSL modem, Wireless router, or other brands router with the default gateway IP 192.168.123.1 and look for a simple user manual to change the password for your WiFI then follow this user guide and complete.
TO login 192.168 l23 1 IP address you need to connect the router using Wired or wireless from an Ethernet port with a computer or laptop. There are some most used IP addresses such as 192.168.1.1, 192.168.1.254, 192.168.2.1, 192.168.10.1 , 192.168.0.1 as well as some more.
Default Username and password for Login
Every router and modem is preconfigured with a default username and password that default also printed to a router and a quick user guide is included with the device first. If you lost your manual or not sure login username and password just follow the below combinations that are mostly used by many leading router and modem manufacturers. Find the default credential for 192168.123.1.
| Username | Password |
| admin | admin |
| admin | password |
| admin | 1234 |
| root | admin123 |
| admin | no password |
Find the login IP address, username, and password printed on the router’s bottom side sticker or beside.
Once you get login details for your Wireless router, DSL modem or cable modem now follow the next steps to access settings from the web browser.
Steps to Login 192.128.123.1
To access a router with the default IP address a connection is required either wireless or wired from a Mobile, Laptop or computer to login into the router setting. Follow the steps to connect the router with a wired or wifi connection first.
- Unbox the router if want to set up the first time and connect it with the DC power adapter included with the device.
- Connect the internet cable to the WAN port before configuring the WAN settings.
- Use a LAN cable from the router LAN port to the computer/Laptop LAN port for wired connections.
- Connect the Default SSID name using the default WiFI key probably printed to router settings.
- Open a browser and access 192.168.123.1 or http://192.168.123.1 from the URL bar and wait to load the page.
- You will get a router login page asking for a username and password.
- Provide default username and password printed to the sticker or try the above login combinations.
Once you logged in inside router settings and you have Network, Wireless, System, and other security settings access, then follow the next steps to configure WAN and Wireless settings.
To set up Wan internet settings ask your service provider to get an internet username and password if the internet type is PPPoE, and a Static IP address with DNS if the internet type is Static to configure WAN settings.
Wireless SSID Network name and Password Change
The router is configured with the default WiFI name and No security or WiFI password printed to the sticker so follow the steps to change your WIFI name and security key.
Go to Wireless Settings
Wireless -Basic Settings
Wireless – Enable
Wireless SSID Name– home-WIFI(create wifi name here)
Channel – Auto
Channel width– auto
Authentication- WPA-WPA2_PSK_AES
Security Key- password 123 (create a stronger password for WIFI)
Press the Save button to apply configurations. You may be disconnected from WiFi and you must change your new wifi name and password. After Wireless Name and password also an important password need to change to secure your WIFI router access.
Change Admin Login Password
The admin password is the main gateway to access settings. Anyone who gets an admin login can change any configuration that is not safe for any network. It is highly recommended to change the Wireless name and password as well as the login password.
Go to the configuration tab in Trendnet Router for login password change.
Use System or Maintenance option in some routers that depends on brand and model numbers.
Configuraiton- Password
Old password– admin (user default or login password used for login router)
New password- create a new Login password to access the router.
Reconfirm– confirm the new password again.
Press the Save button to confirm settings. Keep remember or safe password somewhere. Do not write over the router sticker.
If you are unable to log in to a router or the login page not working make sure you are using the proper IP address 192.168.123.1 instead of using a wrong IP address such as 192.168 123 1, https://192.168.123.1, 192.168.123.l.,192.168.123.1, www.192.168.123.1,192.168.123.1 Pentair, ping 192.168.123.1,192.168.123.1 斐讯k2
If you forget the login password after changing the admin password then you can use the reset button factory reset router to restore default configurations.
Press and hold the reset button for 10 seconds in router power ON mode and wait until the router restarts to default settings.
Related Post
- 192.168.254.1 Router Default Admin Login
- 192.168.9.1 Default Admin Login Router
- 192.168.203.1Admin Router Login Guide
- 192.168.0.10 Admin Login Router
