192.168.1.11 Router Admin Login Username Password

192.168.1.11 Admin Login Router Guide

Login 192.168.1.11 is as simple as login in to a router from IP series 192.168.1.1 to 192.168.1.254. any router and modem use default IP address 192.168.1.11 is the same login steps as login to 192.168.1.1. Many router brands are using 192.168.1.1 as the default IP address but a few brands also use the 192.168.1.11 Default gateway IP address to log in router. If you have a DSL Modem, VDSL Modem, or router with default IP 192.168.1.ll and looking at login settings with the default username password then you can follow this article. Login Router with default IP address needs to connect either wired or wireless depending on router supported interface.

Apart from the login router first you have to get login username and password details for default login mode. Default settings are usually printed to router stickers and a quick user guide comes with a box. Find the default login IP address, username, and password along with the router brand name, Model number, and other information printed to a sticker. You can find the default login username and password given below if your router is older and the sticker or login guide is lost.

Fix Belkin Router Orange Light Flashing Or Solid

Default Login username and password

The default username and password with the router model are available on the router sticker so check if your router is printed with login settings. Most of the leading brand routers use admin as the default username and password so you can try first. Also find different usernames and password combinations as given below.

List of Default Login IP Address, Username and password

Username	Password
admin	admin
admin	password
admin	1234
admin	NA

Get login credentials for your ADSL Modem, Wireless router, or Cable modem printed to your router label and follow the next steps to access the router login page to the web browser.

Best DD-Wrt Router Under $50 in 2022

Steps to Login 192.168.1.11 to Web Browser

You need to connect the router with a LAN cable or WiFi SSID or Security key if your router is a Wireless router or WiFI modem. Follow steps to connect and login to router settings using the 192.168.1.11.1 IP address.

Connect router with Power adapter as supported DC power adapter.
Use WiFi SSID and password to connect using a wireless connection for a WLAN Modem or Router.
For Wired connect use a Cat6 LAN cable from the router LAN port to the Desktop/Laptop LAN port for physical connection.
Go to Computer LAN IP settings and make it DHCP mode (Obtain IP address automatically from DHCP)
If you devise an Access point or Network switch then use Static IP 192.168.1.111 to make access IP address 192.168.1.11.
Open web browsers such as Chrome, Mozilla, Edge and access http://192.168.1.11 to the URL bar.
Within a few seconds, you will get a router login page with a username and password option asking for authentication to enter in settings.
Use the default username and password “admin” or use the same login password and username as printed to your router sticker for default mode. If you already updated your login Password use the same admin login password to access router settings.

After Login into router settings, you can change LAN IP address, update Wireless SSID network name, WiFI password, Enable Mac access list, Port forwarding, Website block and enable parental control, Update firmware and update admin login password as well.

10.0.0.138 Admin Login Username and Password

Change Wireless SSID and WiFi Password

If you log in router the first time then you must update the Wireless SSID and Security key to protect the WIFI network which can access using the default password by any other. Follow the steps to change SSID and Key given below.

Go to the Wireless Settings tab from the top menu.
Wireless – Basic Wireless settings
SSID network name– Change new WIFI name as per choice here.
Channel- Auto
SSID Broadcast– Enabled
Wireless Security Key- WPA/WPA2
WiFi Passphrase– set a stronger mix combination WiFI password that is easy to remember and hard to guess.

Save settings and you may be disconnected from the router if you use a WiFI connection to login router settings. Connect again with the new WIFI name and password to follow further configurations.

Apart from the Login router if you facing any issue while trying to access IP address 192.168.1.11 from the Web browser and return to the error page or IP address taking too long time to respond. Fix login error step to step.

Factory Reset Huawei FTTH ONT Modem Router?

192.168.1.11 IP address Not Working

IP address not working or Site cant be reach error come due to any network misconfiguration or any other network glitch. You can fix this time error by following step by step.

Make sure Your Laptop/Desktop is connected to the router you trying to access directly using a Wired or Wireless cable.
Check LAN cable should connect to LAN port instead of using WAN port.
Make sure the default IP address 192.168.1.11 is Not changed with different IP addresses such as 192.168.0.11 or 192.168.2.11 or any other IP address from a different IP series.
Use correct IP address to URL bar such as http://192.168.1.11 and avoid using wrong IP address 192.168.1.ll, 192.168.0.11, http//192.168.1.11 or www.192.168.1.11, 192.168.1.11.1 or any other IP that invalid IP address.
If you getting a login page but are unable to log in due to an invalid username or password. You can try the above login username and password to access or make a factory reset router.

How to Block website and Apps in Fiber ONT/ONU

Reset Router to restore 192.168.1.11

Make reset router restore settings to default factory setting and you can use default login username and password to access router. Resetting the router will delete all settings so your internet may stop work until setup it up again as per.

Power ON router with DC adapter and wait a second.
Find a tiny reset hole or reset button near the LAN port.
Press and hold the reset button for 10-15 seconds and release when the router LED light auto turn off and turn ON.
Router/Modem will auto restart and takes a few seconds to reset settings to default mode.
After reboot complete check default Login IP addresses 192.168.1.11 start ping and use default username and password as printed to router sticker.
Login router and set up WAN settings as per your internet type to start the internet connection again.